· dongle not will be selling without ACTIVEATION
if you order and you have dongle please write ID dongle in note
لايباع الفلاش لوحده لابد من طلب بروتوكول واحد على الاقل
Toyota Denso Gen2 (newGen) CAN
OBD reading/virtual reading and writing of Toyota Denso newGen ECUs used in Toyota&Lexus petrol and diesel vehicles. Checksum correction.
TYPE 1 (FID: 23, 27)
FullFlash READING and WRITING Toyota&Lexus petrol vehicles with 2.0 6ARFSE, 2.0T 8ARFTS, 1.2T 8NRFTS, 3.5 2GRFKS, 3.5 7GRFSE etc. engines via P5-CAN-bus.
· Engine MCU D76F0199GD 1280Kb
· Engine MCU D76F0196F1 1536Kb
· Engine MCU D76F0219F1 2048Kb
· Transmission MCU D76F0199GD 1280Kb
· Transmission MCU D76F0196F1 1536Kb
Also this FID allows to set READ PROTECTION PATCH which will disable ECU reading and will protect your MOD files from being stolen.
Supported vehicles:
· Lexus NX 200t AGZ1#
· Lexus IS 200t ASE30
· Lexus GS 200t ARL10
· Lexus RX 200t AGL2#
· Lexus RC 200t ASC10
· Lexus ES 200 ASV61
· Toyota Auris 1.2t NRE185
· Toyota Camry 2.0 ASV51
· Toyota Crown 2.0t
· Toyota Tacoma 3.5 GRN3##
· Lexus GS 350 GRL1#
· Lexus RX 350 GGL2#
· Toyota Highlander 2.0t ASU5#
· Toyota C-HR 1.2t NGX##
Supported engines:
· 2.0 6AR-FSE
· 2.0 8AR-FTS
· 1.2 8NR-FTS
· 3.5 2GR-FKS
· 3.5 7GR-FSE
· 3.5hyb 8GR-FXS
· 1.8hyb 2ZR-FXE
· etc.
TYPE 2 (FID: 28)
FullFlash VIRTUAL READING and WRITING with CS and CVN correction for Toyota&Lexus diesel and NA petrol vehicles with 2.8TD 1GDFTV, 2.4TD 2GDFTV, 4.0 1GRFE, 2.7 2TRFE, 2NRFE, 3ZRFAE engines. Writing is possible ONLY if we have file for your vehicle on our server.
· Engine MCU D76F0199GD 1280Kb
· Engine MCU D76F0196F1 1536Kb
· Engine MCU D76F0219F1 2048Kb
Supported vehicles:
· Toyota C-HR ZGX10L
· Toyota HiLUX GUN##
· Toyota LC150 Prado GDJ##, GRJ15#
· Toyota Tacoma TRN2##
· Toyota Yaris 1.5 NSP151
· Lexus RC-F USC10
· Lexus GS-F URL10
· Lexus RX450h GYL2#
Supported engines:
· 2.8TD 1GDFTV
· 2.4TD 2GDFTV
· 4.0 1GRFE
· 2.7 2TRFE
· 5.0 2URGSE
· 1.5 2NRFE
· 2.0 3ZRFAE
· 2.5 2ARFE
· etc.
We will not respond to the claims about the inability to read a file from our server if we do not have it.
Toyota Denso Gen1 CAN
OBD virtual reading and writing via CAN-bus of Toyota Denso and Fujitsu Ten Gen1 ECUs used in Toyota/Lexus/Scion/Hino petrol and diesel vehicles.
Toyota Denso NEC 76F00XX (FID: 24);
Toyota Denso NEC TCM 76F00XX (FID: 26) — test;
NEC 76F0038, 76F0039, 76F0040, 76F0070 and 76F0085.
The module supports:
— Software identification
— Virtual reading of the file or of the lastest software update
— Writing (update version or downgrade)
— Checksums and CVN correction
— Recovery from any state*
* This feature allows to recover a ECU damaged (with any tool) during CAN-Bus writing or Techstream updating. You don’t need any NBD/JTAG device, it can be done with a J2534 device via CAN-Bus in bootstrap mode. This feature allows easy recovery of ECUs, including LC200 4.5TD without opening the ECU and accessing to back side of PCB, including new ECUs without NBD/JTAG pins on PCB (for example Camry V50, Highlander 3.5 U50, etc.).
We will not respond to the claims about the inability to read a file from our server if we do not have it
Toyota Gen1 Virtual Reader
Identification and virtual reading of Denso ECUs on Toyota, Scion, Lexus and Hino vehicles. No writing supported.
It allows to get ID of the firmware through OBD connector with any J2534 adapter and if this firmware available on our server You can download it for FREE.
Toyota Gen1 ECM Virtual reader (FID: 8)
Toyota Denso Gen1 TCM Virtual reader (FID: 9)
Toyota Denso Gen1 HCM Virtual reader (FID: 22)
Attention! This module does not provide writing. This module allows to get the stock files for aquaintance. The module will not work for the Slave users as well. The base now contains 4700+ files.
We will not respond to the claims about the inability to read a file from our server if we do not have it.
Toyota Delphi Gen1 CAN
OBD virtual reading and writing via CAN-bus of Toyota Delphi Gen1 ECUs used in Toyota and Scion petrol vehicles.
The module supports 3 types of Delphi ECUs based on different MCUs: Motorola MPC565, Renesas SH72544 & SH72512
Supported filesize: 1Mb, 1.5Mb, 2Mb
Module allows:
— Software identification
— Virtual reading lastest software update
— Writing (update version or downgrade)
— Recovery from any state
Module supports only CANbus vehicles.
We will not respond to the claims about the inability to read a file from our server if we do not have it.
Toyota Denso Gen3 CAN
OBD reading and writing via CAN-bus of Toyota Denso Gen3 ECUs used in Toyota/Lexus petrol vehicles with new Dynamic Force engines.
Toyota Denso Gen3 R7F701202 (FID: 149);
MCU Renesas R7F701202 with 4MB flash memory.
The module allows:
— Software identification
— Reading
— Writing with checksumm correction
— Recovery after any fail
Supported vehicles:
· Lexus ES250 ES300h (ZA10, ZH10)
· Lexus LS500 (F5)
· Lexus UX200, UX200h (X10)
· Toyota Auris/Corolla 2.0, 2.0hyb (E21)
· Toyota Avalon 2.5hyb (XH5)
· Toyota Camry 2.5, 2.5hyb (VA70, VH70)
· Toyota C-HR 2.0 (X10)
· Toyota Crown 2.0hyb (SH20)
· Toyota RAV4 2.0, 2.0hyb (A50)
· Toyota HiLUX 2.8TD/2.4TD
· etc.
Supported engines:
· 2.0 M20AFKS
· 2.0hyb M20AFXS
· 2.5 A25AFKS
· 2.5hyb A25AFXS
· 2.5hyb A25BFXS
· 3.5turbo V35AFTS
· 2.8TD 1GDFTV
· 2.4TD 2GDFTV
· etc.
Toyota Denso Gen3 R7F701202 Type 2 BENCH-CAN (FID: 235, 236)
FID allows:
· Software identification;
· Virtual reading;
· Writing with checksum correction on the bench
Toyota Yaris GR 1.6T G16E-GTS and Toyota Land Cruiser 300 3.3TD F33A-FTV are supported.
Toyota Denso Gen3 R7F701202 Type 3 BENCH-CAN (FID: 345)
FID allows:
· Software identification;
· Reading on the bench;
· Writing with checksum correction on the bench
Toyota Yaris and Yaris Cross with 1.5hyb M15AFXS and 1.5 M15AFKS engines are supported.
Attention! Writing a MOD file with an incorrectly disabled DTC can brick the ECU with no way to recover.
Module Toyota Denso Gen2 Reader BENCH [SM2/SM3 ONLY]
Special service module for BENCH reading of the petrol and diesel Toyota Denso Gen2 Type2 ECUs working with CAN/P4-CAN .
Allows to do Software ID on the bench and REAL reading of the FullFlash by CANbus.
Works only with Scanmatik 2 Pro and Scanmatik 3 connected to ECU by BENCH cable adapter with automatic power and automatic Boot pin management.
ECU must be connected on the BENCH, no ECU opening required.
Please check User manual for cable adapters and ECU types support info.
Supported MCUs:
- D76F0199GD 1280Kb
- D76F0196F1 1536Kb
- D76F0198F1 1536Kb
- D76F0219F1 2048Kb
Reading time:
- For known password - 8-17 mins
- For unknown stock password - 35-70 mins
Toyota Denso Gen4 BENCH-CAN
FID: 444
Module for reading and writing on the BENCH with CAN-bus Toyota Denso Gen4 ECUs used in Toyota/Lexus petrol vehicles.
Toyota Denso R7F702002 (FID: 444)
Allows to work on the BENCH with exclusive range of the newest Toyota and Lexus petrol vehicles with Denso Gen4 ECUs. This ECUs are based on Renesas R7F702002 MCU with 8Mb internal flash memory.
Module allows:
· Identification
· Real Reading on the BENCH
· Virtual Reading
· Writing on the BENCH with CS check pass
Module covers 7 ECU types that compiled to one common FID with automatic type detection:
· Toyota LC300, Tundra, Lexus LX600 etc with 3.5 Turbo V35A-FTS
· Toyota Tundra/Sequoia Hybrid with 3.5 Turbo V35A-FTS
· 2 types of Lexus LS500 with 3.5 Turbo V35A-FTS
· all known Toyota and Lexus with 2.4 Turbo T24A-FTS
· 2 types of Wildlander 2.0 M20C-FKS and similar
Other ECU types will be added as soon as possible.
_____________
Module Toyota Full
SW identificationRead SW from ECUVirtual reading of SW from our serverWrite SW to ECUAutomatic checksum calculation
Package of 7 modules with discount for Toyota/Lexus/Scion/Hino vehicles.
Package includes:
- Toyota Denso Gen1 CAN
- Toyota Denso Gen2/newGen CAN
- Toyota Denso Gen3 CAN
- Toyota Denso Gen4 BENCH-CAN
- Toyota Delphi Gen1 CAN
- Toyota Gen1 Virtual Reader
- Toyota Denso Gen2 Reader
